Aviation LegislationAviation Legislation Topics

Aircraft Technician Career Roadmap (revised)

The final activity in Aircraft maintenance is releasing Aircraft to service when a highly qualified technician on behalf of the Maintenance and Repair Organisation (MRO) accept it.  This privilege can be granted to the technician only when the required steps are passed according to the Civil Aviation Authority (CAA) regulations. As per the European Aviation Safety Agency (EASA) regulations, the relevant regulations are issued in Part-66 and Part-145 as shown in Figure 1.

Roadmap-1

Figure 1

As illustrated in Figure 1, Aircraft release certification permission requires two important documents:

  1. Type-Rated Aircraft Maintenance License (AML) issued by CAA as per Part-66

This license shall indicate all the following items:

    • Part-66 category, e.g. Cat. B1, Cat. B2, Cat. B3, Cat. C
    • Scope (Aircraft ratings), based on the successfully passed certificate of type-rated course issued by Part-147 approved Maintenance Training Organisation (MTO)
    • Validity date, indicating the license expire date (normally 5 years after issue date)

Note- The license can be updated by the CAA in case of

      • new type-rated endorsement, or
      • extend the validity, close to expire date, by showing an activity report on the same field.
  1. Citification Authorization issued by the MRO as per Part-145

This authorization is limited to the technician AML contents and shall indicate all the following items:

    • MRO defined maintenance category
    • Scope (Aircraft ratings)
    • Validity date, indicating the authorization expire date (2 years after issue date)

Note- Authorization continued validity requires attending updating activities indicated in the MRO Maintenance Organisation Exposition (MOE).

 

The detailed individual roadmap for AML issue is illustrated in Figure 2.

Roadmap-2

Figure 2

The Figure No. 2 shows the requirements and sequence of activities for Type-Rated AML issue which includes:

  1. Initial requirements, including
    • Eligibility, confirming 18-year old of AML applicant
    • Basic knowledge, by passing successfully all the basic modules for the intended maintenance Category (B1, B2, …)
    • Basic experience, about 2 to 5 years practical activity on live Aircraft in a line/base maintenance organisation
  2. Request for CAA Basic AML, via Form 19
  3. CAA Basic AML Issue (not type-rated), via Form 26
  4. A/C Type Training, by passing successfully all the subjects of the Type-Rated course in appropriate level of intended maintenance category in a Part-147 approved MTO, covering both of the following methods
    • Theoretical Training and Examination
    • Practical Training and Assessment
  1. (only for the first endorsement) On-the-Job Training (OJT) covering the Part-66 defined tasks in various subjects
  2. Request for CAA AML Endorsement, via Form 19
  3. CAA AML Amendment (Type-Rated AML), via Form 26

Figure 3

Figure No. 3 shows the requirement for Certification Authorization issue by the MRO. When management who has monitored the maintenance activities of a technician and is satisfied to grant him/her Aircraft release to service authorization, he/she generate a formal request. If the technician is at least 21-year-old and his/her activity/experience fulfills the minimum requirement indicated by the MRO exposition (MOE), he/she will be assessed for the required competency. When all these steps are passed successfully, the MRO will issue a formal document named Certification Authorization. The scope of this permission should not be beyond the scope of technician’s AML. This document permits the technician to sign/stamp the Aircraft Certificate of Release to Service (CRS).

The overall roadmap is sketched in the Figure No. 4.

Figure 4

 

Leave a Reply

Your email address will not be published. Required fields are marked *